Home  |  Sitemap  |  Contact Us     
E Series Vector frequency Inverter
 Product Description :

E-Series Frequency Inverter

Technical Specification of E180 Series

1. “High precision”, “high performance”, “high cost-effective”.
To satisfy the increasingly higher requirements on the industrial production of frequency inverters, Hangzhou Delixi develops a new E series frequency inverter aiming at the market demands. Compared with the old frequency inverters, its precision and performance are improved substantially besides its optimized structure and appearance. Its powerful built-in function may better fulfill the needs of different industries.
2. High control precision
Speed regulation scope
1:100 (SVC) 1:1000(VC)
Speed stabilizing scope
0.5%(SVC) 0.02%(VC)
Torque control precision
5% (VC)

3.Rapid torque response

SVC: Torque response < 20ms

VC: Torque response < 5ms
4.High starting torque
SVC: 0.5 Hz may provide 150% starting torque
VC: 0 HZ may provide 180% torque at zero speed
5.Various vector controls of motors are available
E180 Series may drive asynchronous motor and synchronous motor.
6.Diversified menu display modes
7.Function of built-in timer
It has two built-in timers to collect input timing signals and realize the output of timing signals. Such function may be used separately or in any combination.
8.Built-in virtual time-delay relay
It has 5 built-in virtual time-delay relays to conduct simple logic operation for multi-functional output terminals and digital input terminal signals. The logic result may be considered as equivalent to input terminal function and also may be output from the multi-functional output terminals. Moreover, the logic results may be conducted with time-delay and negation operations.
9.Function of built-in operating module
One quad operating module is built in. such module may conduct simple addition, subtraction, multiplication, division, judgment of size and integral operations. Each operation has 4 input directing addresses and one output directing address. The input directing address is function code.
10.Function of rapid current limiter
In the case the current exceeds the current protection point, the rapid current limiter may keep the current within the current protection point to prevent frequently sending over-current alarm by the frequency inverter and protect the equipment.
11.Excellent capability of power drive control
The maximum drive capability of 24V output power of E-series frequency inverter, equipped with current limiting alarm function, may be 300mA.
The user may use it to supply power to text, touch screen, PLC and relay instead of connecting to an external switch.
 

Technical specification of E-Series Frequency inverter

 

Item

Specifications

Control

Control method

V/F control

Vector control SVC

Vector control VC    Invalid for E100/E102 series

Frequency accuracy

Digital value 0.02%

Analogue value 0.1%

V/F curve

Linear   Square root  Any V/F

Overload capacity

G type machine: 150% rated current 60s; 180% rated current 3s

P type machine: 120% rated current 60s;  150% rated current 3s

Starting torque

G type machine: 0.5Hz/150% SVC; 0Hz/180% VC

Speed regulation scope

1:100 SVC

1:1000 SVC

Speed stabilizing scope

0.5% SVC

0.02%

Torque control precision

5% VC

Torque compensation

Manual torque compensation 0.10% 30.0% Automatic torque compensation

Operation mode

Keyboard, terminal, RS 485 communication

Functions of basic type

Frequency source

14 types of main frequency sources, 14 types of auxiliary frequency sources. Combined switching-over in multiple ways are available. Diversified input method of frequency source, keyboard potentiometer, external analog quantity, digital set point, pulse frequency, multi-speed, simple PLC, communication, operation results.

Torque source

14 types of torque source, including digital set point, external analog quantity, pulse set point, multi-stage instructions, communication, operation results.

Time of ACC/DEC

4 groups of straight lines, switchable by means of time of ACC/DEC, S curve 1, S curve 2

Emergency shut down

Stop the output of the frequency inverter suddenly

Multi-speed

It may set 16 speeds maximally, which may be switched by means of multi instruction terminals.

Simple PLC function

It may set 16 speeds, and the deceleration time, operation time and frequency source may be set independently.

Jogging control

The jogging frequency and jogging time of ACC/DEC may be set independently, and it may also set the preference to jogging under operation status.

Speed tracking

The load speed tracked by the frequency inverter is started.

Fixed-length, fixed-distance control

It may realize the fixed-length and fixed-distance control by the pulse input.

Counting control

It may realize the counting function by the pulse input.

Swinging control

It may be applied for the winding equipment of textiles.

Built-in PID

It may realize SVC.

AVR function

It may ensure the output of constancy in voltage fluctuation of network.

DC brake

It may stop the machine steadily and quickly.

Slip compensation

It is to compensate the slip deviation caused by increased load.

Hopping frequency

It is to prevent the resonance with load.

Dropping function

It is to balance the several motors with the same load.

Timing control

The frequency inverter may stop working after the given time.

Technical specification of E-Series Frequency inverter

 

Item

Specification

Functions of enhanced type

Built-in virtual delay timer

It may conduct simple logic programming for multi-functional output terminals and digital input terminals; therefore, it may be considered as equivalent to the digital input terminal and may realize output via multi-functional output terminal.

Built-in timer

It has 2 built-in timers to collect input timing signals and then output the signals.

Those timers may be used together or independently.

Built-in operation module

It has 1 quad operation module and may conduct simple addition, subtraction, multiplication, division, judgment of size and integral operations.

Communication

E100

The control panel has RS 485 communication interface and it supports MODBUS protocol.

E102/E180

The control panel has no RS communication interface and shall be installed with an external communication expansion card.

It supports standard MODBUS protocol and may be installed with MODBUS communication expansion card.

Encoder

E100

It may connect to the encoder via DI5 and DI6 terminals on the control panel. Such connection may realize SVC easily via PID control and may be applied to those requiring lower control precision.

E180

Since the control panel has no encoder interface, it shall be installed with an expansion card. It supports ABZ incremental encoder, UVW incremental encoder and rotary transformers. Such connection may realize high performance VC and may be applied for those requiring higher control precision.

Type of motor

E100/E102

It can only drive the asynchronous motor

E180

It may drive the asynchronous motor and the synchronous motor.

Display

Operation information

Given frequency, output frequency, output voltage, bus voltage, input signal, feedback value, modular temperature, output frequency, synchronous speed of motor. It may show 32 information by use of >> key.

Error information

It may save the 3 failure information with frequency, current, bus voltage, output/input terminal status when failed under failure protection status.

Protection

Frequency inverter protection

It may protect the equipment against over current, over voltage, modular failure, under voltage, over heat, over load, external failure, EEPROM failure protection, grounding protecting and default phase.

Alarm of frequency inverter

It may protect the equipment and send over-load alarm

Instant power down

It may keep running in the case of lower than 15 ms.

It may be restarted automatically in the case of larger than 15 ms.

Environment

Ambient temperature

-10~40

Storage temperature

-10~40

Ambient humidity

90% RH maximally, non-condensing

Height/vibration

Lower than 1000m, 0.6g

Place of application

No etchant gas, inflammable gas, oil mist or dust.

Cooling method

Forced cooling

E Series Inverter Model and Capacity Table

 

Series No.

Model

Rated Capacity

(kVA)

Rated Input Current

(A)

Rated Output Current

(A)

Adaptive Motor

(kW)

Brake Unit

DC Reactor

LCD Keyboard

E100/E102 Series

S2 (Single-phase220V, 50/60Hz)

CDI-E100G0R4S2B

0.8

5.0

2.0

0.4

Standard Built-in

N/A

N/A

CDI-E100G0R75S2B

1.5

9

4.0

0.75

CDI-E100G1R5S2B

2.7

15.7

7.0

1.5

CDI-E100G2R2S2B

3.8

27

10.0

2.2

T2 (Three-phase 220V, 50/60Hz)

CDI-E100G0R4T2B

0.8

2.3

2.0

0.4

Standard Built-in

N/A

N/A

CDI-E100G0R75T2B

1.5

6

4.0

0.75

CDI-E100G1R5T2B

2.7

8.8

7.0

1.5

CDI-E100G2R2T2B

3.8

12.5

10.0

2.2

T4 (Three-phase 380V, 50/60Hz)

CDI-E100G0R75T4B

1.5

3.4

2.3

0.75

Standard Built-in

N/A

N/A

CDI-E100G1R5T4B

3.0

5.0

3.7

1.5

CDI-E100G2R2T4B

4.0

5.8

5.1

2.2

CDI-E100G3R7T4B

5.9

10.5

8.8

3.7

E180 Series

T4 (Three-phase 380V, 50/60Hz)

CDI-E180G0R75T4B

1.5

3.4

2.3

0.75

Standard Built-in

N/A

Optional

CDI-E180G1R5T4B

3

5.0

3.7

1.5

CDI-E180G2R2T4B

4

5.8

5.0

2.2

CDI-E180G3R7/P5R5T4B

5.9/8.5

10.5/15.5

8.8/13

3.7/5.5

CDI-E180G5R5MT4B

8.5

15.5

13

5.5

CDI-E180G5R5/P7R5T4B

8.5/11

15.5/20.5

13/17

5.5/7.5

CDI-E180G7R5/P011T4B

11/17

20.5/26

17/25

7.5/11

CDI-E180G011MT4B

17

26

25

11

CDI-E180G011/P015T4BL

17/21

26/35

25/32

11/15

Standard Built-in

CDI-E180G015/P018.5T4BL

21/24

35/38.5

32/37

15/18.5

CDI-E180G018.5/P022T4

24/30

38.5/46.5

37/45

18.5/22

Optional Built-in

Optional Built-in

CDI-E180G022/P030T4

30/40

46.5/62

45/60

22/30

CDI-E180G030/P037T4

40/50

62/76

60/75

30/37

CDI-E180G037/P045T4

50/60

76/92

75/90

37/45

Optional Built-out

CDI-E180G045/P055T4

60/72

92/113

90/110

45/55

CDI-E180G055/P075T4

72/100

113/157

110/152

55/75

CDI-E180G075/P093T4

100/116

157/180

152/176

75/93

Optional Built-out

CDI-E180G093/P110T4

116/138

180/214

167/210

93/110

CDI-E180G110/P132T4

138/167

214/256

210/253

110/132

CDI-E180G132/P160T4

167/200

256/305

253/300

132/160

CDI-E180G160/P185T4

200/224

305/344

300/340

160/185

CDI-E180G185/P200T4

224/250

344/383

340/380

185/200

CDI-E180G200/P220T4

250/276

383/425

380/420

200/220

Standard Built-in

CDI-E180G220/P250T4

276/316

425/484

420/480

220/250

CDI-E180G250/P280T4

316/355

484/543

480/540

250/280

CDI-E180G280/P315T4

355/395

543/605

540/600

280/315

CDI-E180G315/P355T4

395/447

605/683

600/680

315/355

CDI-E180G355/P375T4

447/467

683/714

680/710

355/375

CDI-E180G375/P400T4

467/494

714/753

710/750

375/400

CDI-E180G400/P500T4

494/612

753/934

750/930

400/500

CDI-E180G500/P630T4

612/790

934/1206

930/1200

500/630

CDI-E180G630T4

790

1206

1200

630

Model selection table of DELIXI frequency inverter (- indicates having no such function indicates supporting such function)

 

Item

Specification

9100S Series

Scope of power

Single phase 220V

0.4~2.2kW

--

Three phase 380V

--

Input configuration

Digital input

6

Analog input

2

Output configuration

Relay output

1

Open collector output

--

Analog output

1

Pulse output

--

Keyboard

LED nixie tube

LCD screen with Chinese characters

--

Built-in brake unit

--

Control power

P24V

--

Type of motor

Asynchronous motor

Synchronous motor

--

Type of control

V/F control

SVC

--

VC

--

Operation mode

Speed mode

Torque mode

--

Communication

RS485

--

Main functions

Rapid current limiting

--

Built-in analog relay

--

Built-in timer

--

Built-in operation modular

--

Background software

--

Speed tracking

--

Parameter identification

--

AVR function

--

Parameter backup

--

Dropping control

--

Protection

Over current, over voltage

Output grounding

--

Input/output default phase

--

Motor overload

--

 

Main products

E102 Series

E100 Series

E180 Series

0.4~2.2kW

0.4~2.2kW

--

0.4~2.2kW

0.4~2.2kW

--

0.75~3.7kW

0.75~3.7kW

0.75~75kW

5 (1 for high-speed input, only internal power sink type connection is allowed)

6 (1 for high-speed input, external power source type and sink type connections are allowed)

6 (1 for high-speed input, external power source type and sink type connections are allowed) (4 expandable)

2

2

2 (1 expandable)

1

2

2

--

1

1, 2 expandable

1

2

2

--

1

1

--

--

15kW or lower (18.5 ~30kW optional)

(without current-limiting protection)

(without current-limiting protection)

(without current-limiting protection)

--

--

--

--

(with communication expansion card)

(with communication expansion card)

 You are here : Home > Products > Freuency Inverter
 Update : 2013-09-06 15:29:46  Clicks : 12070 Print This Page Email Us